DISCONTINUED
Grid Connect Sine Wave Inverter 12VDC 2000W
CAT.NO:MI5192
Grid Connect Sine Wave Inverter 12VDC 2000W
CAT.NO:MI5192
If you haven’t been living under a rock for the past few years, then you will have certainly heard about the generous rebates that the Australia...
Out Of Stock
Description
Features:
• AC circuit breakers built in
• Suitable for use with solar, wind*, hydro or other renewable energy sources
• Maximum Power Point Tracking (MPPT) system
• High efficiency
• Pure sine wave output
• Low frequency inverter design (based on toroidal transformer)
• LCD front panel display provides readout of system parameters
• Programmable via front panel
• Feeds power to the grid either directly from a solar array or from energy stored in a battery bank
• Optional external remote control
*Wind turbine generators must have clean DC output. External turbine regulator may be required for AC/3-phase wind generators where a battery bank is not used.
NOTE: Contact your local electricity provider for details on grid-tied solar power credits. Special metering is required to receive feed-in tariffs.
Two Models:
Grid Tie Inverter 12VDC 2000W Cat MI-5192
Grid Tie Inverter 24VDC 2000W Cat MI-5194
MI-5192 - 12VDC 2000W
Input
• Max input power at 50°C 2400W
• Max DC input current: 180A
• Max DC input voltage: 40V
• MPPT range: 16.5-32V
• Battery mode input range: 10-16V
Output
• Output power nominal at 50°C: 2000W
• Output power max: 2200W
• Output voltage range: 205 - 265VAC
• Output frequency: 50Hz±1Hz
• Night power consumption: Nil
• Input/output isolation: 3500VDC via toroid transformer
• Anti islanding protection: Over/under voltage, over/under frequency
active phase shift
• Parameters displayed: PV voltage, PV current,
• AC grid voltage, current, feed power, kWh
• Dimensions: 424(H) x 256(W) x 368(D)mm
• Weight: 26kg
• Approval No: SAA100339
• AC circuit breakers built in
• Suitable for use with solar, wind*, hydro or other renewable energy sources
• Maximum Power Point Tracking (MPPT) system
• High efficiency
• Pure sine wave output
• Low frequency inverter design (based on toroidal transformer)
• LCD front panel display provides readout of system parameters
• Programmable via front panel
• Feeds power to the grid either directly from a solar array or from energy stored in a battery bank
• Optional external remote control
*Wind turbine generators must have clean DC output. External turbine regulator may be required for AC/3-phase wind generators where a battery bank is not used.
NOTE: Contact your local electricity provider for details on grid-tied solar power credits. Special metering is required to receive feed-in tariffs.
Two Models:
Grid Tie Inverter 12VDC 2000W Cat MI-5192
Grid Tie Inverter 24VDC 2000W Cat MI-5194
MI-5192 - 12VDC 2000W
Input
• Max input power at 50°C 2400W
• Max DC input current: 180A
• Max DC input voltage: 40V
• MPPT range: 16.5-32V
• Battery mode input range: 10-16V
Output
• Output power nominal at 50°C: 2000W
• Output power max: 2200W
• Output voltage range: 205 - 265VAC
• Output frequency: 50Hz±1Hz
• Night power consumption: Nil
• Input/output isolation: 3500VDC via toroid transformer
• Anti islanding protection: Over/under voltage, over/under frequency
active phase shift
• Parameters displayed: PV voltage, PV current,
• AC grid voltage, current, feed power, kWh
• Dimensions: 424(H) x 256(W) x 368(D)mm
• Weight: 26kg
• Approval No: SAA100339