Press N Peel PCB Film
CAT.NO:HG9980
Press N Peel PCB Film
CAT.NO:HG9980
This is by far the easiest way to make Printed Circuit Boards from CAD software or magazine PCB layout artwork.You simply make the PCB image by p...
£22.95
Bulk Pricing:
| 1-3 | £22.95 |
| 4-9 | £20.45 |
| 10+ | £17.95 |
In Stock
Description
This is by far the easiest way to make Printed Circuit Boards from CAD software or magazine PCB layout artwork.
You simply make the PCB image by putting a Press 'n' Peel sheet of transfer film in the paper tray of a photocopier or Laser Printer (The sheet size is almost the same as the A4 paper tray). You then print or copy the PCB track image onto the film. Using a domestic clothes iron you press the image onto a precleaned piece of copper clad PCB. The image transfers to the copper and the image will not etch away. Ammonium Persulphate or Ferric Chloride are both OK.
You get 5 sheets of 215 x 280mm transfer film in each pack.
Full instructions supplied.
4 Easy steps
1. Print or Copy
2. Iron on
3. Peel off
4. Etch
You simply make the PCB image by putting a Press 'n' Peel sheet of transfer film in the paper tray of a photocopier or Laser Printer (The sheet size is almost the same as the A4 paper tray). You then print or copy the PCB track image onto the film. Using a domestic clothes iron you press the image onto a precleaned piece of copper clad PCB. The image transfers to the copper and the image will not etch away. Ammonium Persulphate or Ferric Chloride are both OK.
You get 5 sheets of 215 x 280mm transfer film in each pack.
Full instructions supplied.
4 Easy steps
1. Print or Copy
2. Iron on
3. Peel off
4. Etch