
Universal Pre-Punched Experimenters Board - Large
CAT.NO: HP9554
Universal Pre-Punched Experimenters Board - Large
CAT.NO: HP9554
Universal pre-punched experimenters board
£5.45
Bulk Pricing:
1-3 | £5.45 |
4-9 | £4.90 |
10+ | £4.35 |
In Stock
Description
The low cost way to build prototypes. Each donut is separated from its neighbours by about a 0.5mm gap. This effectively isolates each pad but also makes it easy to bridge solder across to make interconnections. Each board also has `fingers' on opposite ends with a 3.6mm edge pitch. These can be used to connect to and from the board or to a card edge connector. Finally the non- solder side of the board has an alpha- numeric grid printed on it to assist in component identification board layout.
Specifications
Width | 210mm |
Length | 78mm |
PCB hole spacing | 2.54mm |
PCB hole number | 1608 |
Board type | Doughnut |
Downloads
DELIVERY
CHECK IN-STORE
Have a question ?
Call our Techstore
on 1800 022 888
Call our Techstore
on 1800 022 888